How do I disable Windows Firewall via graphical interface?

This article discusses how to disable Window Firewall from a graphical interface.

It is recommended to disable Windows Firewall during system configuration.

Procedure

  1. Open command prompt using one of the following methods:
    1. Windows key + R —> type firewall.cpl —> click OK.
    2. Star menu —> type run and open applet —> type firewall.cpl —> click OK.
  2. Select Turn Windows Defender Firewall on or off on the left and configure the firewall settings as shown below (turn the firewall off).
  3. Click OK to save settings.