How do I update the password for my WWVDS bi-spectrum cameras?

Using DeviceManager

1. Open DeviceManager and click refresh.
   1. You will see a list of bi-spectrum cameras on your network.
2. In the DeviceManager application, in the Operation column, click on the pencil icon and in the Modify network parameters pop-up window update the administrator password for the camera.
   1. Default username = admin
   2. Default password = GovComm1!
3. If necessary, you can update the network settings: IP address, subnet mask, and gateway.
4. Click Modify to save the changes.
5. Click Confirm in the Information pop-up window. You will see the updated camera settings in the DeviceManager application.

Using Web Interface

1. Enter the bi-spectrum camera's IP address in your browser to access the login window. When connecting to a bi-spectrum camera for the first time, use the default credentials:
   1. Default username = admin
   2. Default password = GovComm1!
2. You will see a pop-up window asking you to change the default password.
3. Click OK to save the changes and open the camera's web interface.
   1. If you need to change the password later, in the web interface, navigate to Setup —> System —> Account and in the list of users click on the pencil icon in the Modify column.