How do I log into my camera's web interface?

This article discusses how to log in and gain access to your GovComm ITS camera.

Product applicability

The following products are discussed in this article:

  • ITS Cameras:
    • GC-ICPO Series
    • GC-IL Series

Procedure:

  1. Connect to camera from your laptop using an Ethernet cable.
  2. Configure laptop Ethernet adapter as such:
    1. IP Address: 192.168.1.100
    2. Subnet Mask: 255.255.255.0
  3. Open a web browser and enter http://192.168.1.64/
  4. Log in using the following credentials:
    1. User ID: admin
    2. Password GovComm1

If your password has changed from the default above, please use this password instead for step 4.

For more information on setup, please see our quick start guides here.