How do I commission my WWVDS system?

This article discusses the steps to take to commission your WWVDS once it has been installed.

Please see the procedure below for commissioning your GovComm WWVDS system:

  1. Install the WWVDS system as per commissioning notice included with your shipment, project site drawings, and installation manual.
  2. Fill out the Pre-Configuration Checklist and return it to our team here.
  3. Our commissioning team will schedule a date and time to configure the newly installed systems and aid in aligning the cameras.

This procedure is critical in to ensure that the system is functioning properly and ready for testing. 

For assistance with commissioning, please contact our team here.

Commissioning notice, pre-configuration checklist, and install manual can be found here can be found here.